On paper, a pumping plan might seem straightforward: water is required to be pumped from one place to another. In actuality, the distance between those two points can involve changing flow rates, elevation variations as well as solids, pressure requirements storage capacity, control, electrical equipment, maintenance access and restrictions on the site.
Image credit: romtecutilities.com
Romtec Utilities begins the design of the pumping station with defining the operational conditions, instead of choosing the equipment from catalogues. Then, preliminary designs and budgetary requirements can be formulated based on the requirements of the project requires.
Think about where do we go?
The solution immediately alters the engineering.
Domestic sewage is often contaminated with solids, and can experience a variety of variations in the daily flow. A wastewater lift station has to transfer the wastewater efficiently whenever gravity conveyance isn’t available or not sufficient. Engineers must therefore consider the anticipated inflow and the conditions of peak, pumping capacity and wet-well behavior, discharge requirements, as well as how the equipment will be maintained and operated.
Industrial water has its own challenges. A manufacturing or processing facility could require moving oily, caustic, high-temperature, or high-pressure fluids. Romtec Utilities creates industrial systems which are used in various applications ranging from data centers to installations for oil and gas as well as food processing, power generation, and pharmaceutical waste.
Rainfall can create a totally different operating cycle
Stormwater systems may be off the grid for extended periods, only to suddenly have to handle large volumes during a major storm.
A stormwater lift station associated with a detention basin, for example, must work with the site’s larger drainage strategy. The basin is filled with runoff and temporary storage manages the immediate volume, and the pumping system then moves collected water toward an approved discharge point.
Romtec Utilities provided this solution to help develop a Norco business park in California. The plan called for a pumping station to empty the detention system of the stormwater drainage system of the public. The station was planned to work as a component of a drainage system in a development, not as an isolated piece of equipment.
“Package” Doesn’t need to mean Off-the-Shelf
Many people believe that a system for pumping packages is just a predetermined collection of parts.
In the scenario of engineered infrastructures packaging can refer to the fact that all of the main components are coordinated into one system. Meters, pumps, valves and controls, communications structural elements, and more equipment can be selected around the specific duty requirements.
That approach becomes especially useful when a new system needs to connect to existing infrastructure. Industrial plants and municipal facilities don’t always provide ample space to install or maintain in good condition. Equipment might need to be positioned within existing structures, piping, electrical systems, and operational schedules.
Capacity planning has real consequences
The cost of undersizing increases as the size of the facility increases.
Romtec Utilities supplied a sewer lift station in Portland International Airport for the PDX Next extension. The new station had be constructed to provide twice the capacity at peak flow since the airport had expanded.
This is a great illustration of a fundamental engineering principal: Design conditions are not limited to the amount of work a facility is able to be able to handle during the typical afternoon. Engineers must also be aware of the impact of peak demand.
The Work isn’t Done until the Equipment Arrives
At the point where drawings and calculations need to evolve into an operational system. Installation coordination, startup testing documentation, and user understanding all contribute to the long-term success of.
The outcome after the creation of a pumping unit determines its performance. The decisions made in the initial design are clearly visible when the pump needs to be maintained as flows rise or when a storm hits.
Romtec Utilities integrates these options to create a complete pumping solution for a particular project. It assists in turning equipment into infrastructure made specifically for the environment that it will be utilized.